Archive for the ‘Bar Building’ Category

Reasons to buy your Bar rail Molding and Parts from Hardwoods Incorporated

At Hardwoods Incorporated, we make each and every bar rail molding and bar part in our own shop here in the USA. We never outsource and never cut corners or quality in an attempt to save money. Our large selection of quality bar rail moldings are always in stock and ready to ship. You won’t receive any excuses about back orders from a third party. We offer 7 different bar rail molding profiles in over a dozen different domestic and exotic hardwoods. Our products are affordable without sacrificing quality. We are the only company that makes and ships the true…

Read More »

Why choose Hardwoods Incorporated?

When searching for the finishing touch for your home or commercial bar, do you really want to buy your bar top or bar rail molding from a source that also sells refrigerators, concrete, and shingles? How important to you is quality and technical support? Do you desire the ability to watch a video of a bar top installation or speak to a knowledgeable person when you’re in a bind? At Hardwoods Incorporated, we do bar-building supplies. And only bar-building supplies. With our premium bar rail moldings, radius corners, bar tops, and other bar-building necessities, you are sure to find something…

Read More »

Why Choose a Hardwood bar top Slab?

Hardwood bar tops make great additions to any home or commercial bar! Each unique slab comes with its own set of colors, wood grain, and flaws, giving your project an individual character. We at Hardwoods Incorporated have a wide variety of natural hardwood bar top slabs to choose from. No two hardwood bar top slabs are alike, meaning your project will be unlike any other bar top out there. Our solid one-piece bar top slabs can be routered with a soft bull nose edge to show off the full character of your new bar top while being a comfortable space…

Read More »

Custom Commercial Bar Top

Pictured is a recently completed commercial bar top made from solid oak for a client in Chester, New York and manufactured by Hardwoods Incorporated using our stock bar top kits, glass rail & drip edge, bar top wings and BR475 Bar Rail Molding and radius corner.

New Shipping Specifications for BR475-S Bar Rail Radius Corners

Our BR475-S bar rail molding corners now ship with the skirt/apron portion trimmed back 1/2″ as shown below: This 1/2″ cut back allows for the adjoining straight section of apron to lap over onto the radius section and thus creating a visual offset. The offset adds strength to the joint, looks better visually and eliminates the need for perfect allignment with the seam on the actual bar rail molding itself. Please contact us with questions or concerns prior to ordering or when installing our BR475-S Bar Rail Radius Corners. Thank you for choosing Hardwoods Incorporated. Save

How Much Bar Rail Do I Need?

Not sure how much bar rail molding and parts to order? Don’t see the wood specie or lengths required to complete your home or commercial bar top? Please Contact Us by phone, 1-844-BAR-RAIL, or by email. Our staff is eager and ready to answer pre-order questions and make recommendations for your specific bar project. You may also send us a rough sketch, finished drawing or picture of the bar you want to build and we will respond with our suggestions on the best methods, bar building materials and shipping options to achieve your goal. At Hardwoods Incorporated we stock a large…

Read More »

Fitting Bar Rail Radius Corners & Straights

Although all of our bar rail molding both radius and straight are made to meet or exceed industry standards for fit and consistency, it may be necessary to scribe and adjust the placement of the seams to achieve optimum results. This is especially true where curved parts intersect with straight parts as the conditions on the job site can vary from those under which the curved and straight parts were made. Not to worry, you can make slight adjustments out or up of either the straight or curved part to make a near perfect transition then sand and feather in…

Read More »

Specialty Hardwood Bar Rail Molding by Hardwoods Incorporated

At Hardwoods Incorporated we offer our entire line of Chicago bar rail moldings, bar top parts and bar front parts made from specialty hardwoods such as Wenge, Lacewood, Jatoba or Zebrawood just to name a few. We also make our matching bar rail radius corners in a variety of sizes and configurations for both 90 and 45-degree bar top corners. Pictured below are our BR475 and BR475-S 6” and 12”- 90-degree radius corners in Bubinga, Leopardwood and Sapele Mahogany respectively. Whether you are building a custom wine cellar, espresso bar or an upscale commercial bar nothing says custom more than…

Read More »

International Shipping by Hardwoods Incorporated

At Hardwoods Incorporated we offer international shipping of our bar rail moldings, bar top parts and bar front parts to DIY customers, restaurant owners, developers, property management teams and contractors. Because of the variance in shipping providers and to furnish the best possible pricing, we at Hardwoods prefer to build custom quotes for our international customers. With our easy to use international quote form found on our website, customers can select the bar rail molding and bar parts needed to complete their home or commercial bar project and submit their wish list along with shipping and contact information. Once received…

Read More »

Bar Rail Cut & Bisquet Jointed for Affordable Shipping Nationwide

At Hardwoods Incorporated we offer our bar rail moldings that are longer than 8’ cut and bisquet jointed for affordable shipping nationwide. All of our 10’, 12’ and 15’ long bar rail moldings offered online are made from one full length of bar rail then cut in half with a bisquet joint installed so they can be re-assembled on the bar top matching the grain back together. These are NOT two random pieces of bar rail. We also offer a tool at checkout called order notes where you can indicate if you want the bar rail cut and bisqueted in…

Read More »

They bent over backward to ensure I got what I needed including the radius corner, it was almost made to order! The wood took the stain amazingly and looks great!

Thanks

Joe V. – Catonsville, Maryland

06/02/2020

BR475 Chicago Bar Rail Molding

Great product, great customer service…bar looks amazing love this company…

William B. – Apopka, Florida

07/15/19

Bar top kits & bar rail moldings.