Archive for December, 2016

New Addition to our DIY Bar Building Products!

New item just added to our DIY bar building products; 21″ wide Main bar top kits tongue and groove offered in 6′, 8′ and 10′ lengths. This item can be used with or without our glass rail and drip edge option for a wider bar top surface. Suitable for commercial bar tops and home bar tops alike. Combine various lengths for our 21” wide or 16” wide main bar top kits to make a continuous bar top of any length by simply alternating the joints. See our “How to assemble and install bar top kits” for details. Be sure to…

Read More »

How to Assemble & Install Main Bar Top Kits

Posted on:   |  4 Comments

Remove the bar top parts from the box and lay them out on your work bench to familiarize yourself with how they go together. Prepare the tools needed to complete the job; a drill, drill bits and countersink, 1-1/4” x #6 or #8 wood screws, wood glue, bar and C clamps and a clean damp cloth. Determine if you want to cut and fit all the planks first or cut, fit and install each plank as you go; whatever way is easier for you. Next, miter and or cut to size the 6” wide plank and place it 1-9/16” from…

Read More »

Paul,

I just wanted to thank you for including that extra inch on the bar rail a few weeks ago and let you know how it turned out.

When we went to install it, we had exactly 3/8″ to spare! We trimmed it up and it slid right in. It looks fantastic!

Also, all of the helpful hints on the website were greatly appreciated. By the time I got done reading/watching all of the instructions and related hints, I was fully prepared and didn’t encounter any nasty surprises. Frankly, it may have been one of the easiest parts of the project.

I am sanding things down now in preparation for staining.

Thanks again.

David P.Glenview, IL

Really happy with the bar rails. Arrived in great condition and was easy to install on my hand built bar.

Alan M. – Seattle, Washington

02/07/2021

BR475 Maple Bar Rail Molding