Posts Tagged ‘Bar Top Kits’

Tongue and Groove Bar Top Slabs

We’ve been busy in the shop making bar top kits and bar rail moldings for all of our customers. Pictured below is over 140 linear feet of tongue and groove main bar top kits made from poplar for a large commercial bar project in Philadelphia Pa.Main bar top kits are ready to assemble and install easily over your plywood subtop 1 piece at a time with screws from underneath, gluing only the top edge of the joints. A bar clamp may be used to close any open seams while attaching the planks. Clean any excess glue with a damp cloth,…

Read More »

Paul,

I am a novice at wood working but have learned a lot over the past several years working on my basement.  The last part was getting the bar done.  I can now say that it is done.

Joseph Beissel 1

I want to thank you for all the help that you provided since I first contacted you.  First the kit that I bought was phenomenal/  All of the parts fit like a glove.  The rounded corners add so much to the bar.  With the help of a contractor it took a day to put it together.  Two coats of stain and seven coats of poly later, it looks awesome.  I have attached a few photos.

Without your help I would not have been able to get it done.Thanks again!!!

Joe B. – Lockport IL

12/18/17

Without your help I would not have been able to get it done.Thanks again!!!

Paul,

Thank you so much for your help. I received the package yesterday and couldn’t be more happier.

Thanks

Jason K. – Bristow VA

02/08/18

Thank you so much for your help.