Archive for the ‘Bar Rail Installation’ Category

Traditional wood bar arm rest molding with cropped corners.

When building a home or commercial bar of any size or shape at some point in the process you will need to decide how to deal with the corner or corners of the bar rail molding. The standard option for navigating turns in bar rail molding is the simple 90 degree mitered corner. Although this option may be a fast and easy way to make the corner it can result in a somewhat sharp edge at the very tip of the miter that can be a little tough on your guests. There is another option.  How about taking the edge…

Read More »

New Shipping Specifications for BR475-S Bar Rail Radius Corners

Our BR475-S bar rail molding corners now ship with the skirt/apron portion trimmed back 1/2″ as shown below: This 1/2″ cut back allows for the adjoining straight section of apron to lap over onto the radius section and thus creating a visual offset. The offset adds strength to the joint, looks better visually and eliminates the need for perfect allignment with the seam on the actual bar rail molding itself. Please contact us with questions or concerns prior to ordering or when installing our BR475-S Bar Rail Radius Corners. Thank you for choosing Hardwoods Incorporated. Save

Bar Rail Molding 101

At Hardwoods Incorporated we’ve been making our bar rail moldings and matching radius bar rail corners to the same design specifications for over 40 years. Our double notch bar rail system accepts (2) layers of ¾” bar top material sandwiched one on top of another for a solid 1-1/2” thick bar top providing stability and strength. (As shown) All of our Chicago style bar rail moldings BR475, BR550, BR650, BR475-3CM and BR475-S lay at a perfect comfortable angle displaying their 3 dimensional qualities ideal for use on home bars, commercial bars and pub rails.     When choosing a bar…

Read More »

How to Build a Bar – Standard Dimensions, Specs & Resources

What are standard bar dimensions? How tall is a standard bar? How wide should you make a bar top? How do you build a home bar? How do you install Chicago bar rail? How do you cut and install curved radius bar rails for corners? These are the questions we receive all day, every day by wood workers, architects and contractors building home bars and commercial bars alike. Hardwoods Incorporated is now introducing our Bar Building Resources. Visit our new Bar Building Resource Center to learn how to install bar rail molding standard bar dimension and specifications how to cut…

Read More »

How to Install Bar Rail

How to Install Bar Rail A short guide to installing Chicago style bar rail: The tools we will be using to fit and install the bar rail molding are a drill, glue, screws, spoil board, biscuit joiner, and biscuits. The sub top should extend out beyond the main bar top 1 and 9/16″ as shown. We first set up the spoil board to hold the bar rail up in position while cutting. We set the miter box angle at 45 degrees and position the bar rail on the spoil board to make the first cut. Next, we reset the miter…

Read More »

The Original Chicago Bar Rail

Are you building a bar, installing and counter in your store, shelving in your home, or finally finishing that man cave? Then you need to know about  BR 475S Chicago Bar Rail! BR 475S Bar Rail is the original style of Chicago Bar Rail. This bar rail style originally appeared in taverns, corner bars, VFW’S, American Legions, firehouses, and pubs throughout the USA in the early 40’s & 50’s. This bar rail style includes a shirt/apron that gives it a much thicker curvy appearance. During that era of bar building the Chicago bar rails were usually made from mahogany and…

Read More »