Archive for the ‘Bar Building’ Category

Custom Commercial Bar Top

Pictured is a recently completed commercial bar top made from solid oak for a client in Chester, New York and manufactured by Hardwoods Incorporated using our stock bar top kits, glass rail & drip edge, bar top wings and BR475 Bar Rail Molding and radius corner.

New Shipping Specifications for BR475-S Bar Rail Radius Corners

Our BR475-S bar rail molding corners now ship with the skirt/apron portion trimmed back 1/2″ as shown below: This 1/2″ cut back allows for the adjoining straight section of apron to lap over onto the radius section and thus creating a visual offset. The offset adds strength to the joint, looks better visually and eliminates the need for perfect allignment with the seam on the actual bar rail molding itself. Please contact us with questions or concerns prior to ordering or when installing our BR475-S Bar Rail Radius Corners. Thank you for choosing Hardwoods Incorporated. Save

How Much Bar Rail Do I Need?

Not sure how much bar rail molding and parts to order? Don’t see the wood specie or lengths required to complete your home or commercial bar top? Please Contact Us by phone, 1-844-BAR-RAIL, or by email. Our staff is eager and ready to answer pre-order questions and make recommendations for your specific bar project. You may also send us a rough sketch, finished drawing or picture of the bar you want to build and we will respond with our suggestions on the best methods, bar building materials and shipping options to achieve your goal. At Hardwoods Incorporated we stock a large…

Read More »

Fitting Bar Rail Radius Corners & Straights

Although all of our bar rail molding both radius and straight are made to meet or exceed industry standards for fit and consistency, it may be necessary to scribe and adjust the placement of the seams to achieve optimum results. This is especially true where curved parts intersect with straight parts as the conditions on the job site can vary from those under which the curved and straight parts were made. Not to worry, you can make slight adjustments out or up of either the straight or curved part to make a near perfect transition then sand and feather in…

Read More »

Specialty Hardwood Bar Rail Molding by Hardwoods Incorporated

At Hardwoods Incorporated we offer our entire line of Chicago bar rail moldings, bar top parts and bar front parts made from specialty hardwoods such as Wenge, Lacewood, Jatoba or Zebrawood just to name a few. We also make our matching bar rail radius corners in a variety of sizes and configurations for both 90 and 45-degree bar top corners. Pictured below are our BR475 and BR475-S 6” and 12”- 90-degree radius corners in Bubinga, Leopardwood and Sapele Mahogany respectively. Whether you are building a custom wine cellar, espresso bar or an upscale commercial bar nothing says custom more than…

Read More »

International Shipping by Hardwoods Incorporated

At Hardwoods Incorporated we offer international shipping of our bar rail moldings, bar top parts and bar front parts to DIY customers, restaurant owners, developers, property management teams and contractors. Because of the variance in shipping providers and to furnish the best possible pricing, we at Hardwoods prefer to build custom quotes for our international customers. With our easy to use international quote form found on our website, customers can select the bar rail molding and bar parts needed to complete their home or commercial bar project and submit their wish list along with shipping and contact information. Once received…

Read More »

Bar Rail Cut & Bisquet Jointed for Affordable Shipping Nationwide

At Hardwoods Incorporated we offer our bar rail moldings that are longer than 8’ cut and bisquet jointed for affordable shipping nationwide. All of our 10’, 12’ and 15’ long bar rail moldings offered online are made from one full length of bar rail then cut in half with a bisquet joint installed so they can be re-assembled on the bar top matching the grain back together. These are NOT two random pieces of bar rail. We also offer a tool at checkout called order notes where you can indicate if you want the bar rail cut and bisqueted in…

Read More »

New Bar Front Panel Moldings

New Bar Front Panel Moldings Available Online by Hardwoods Incorporated Recently added to our bar front parts selections are our PM-58 and PM-158 panel moldings for trimming your bar front. The PM-58 is a cove and bead panel molding measuring 5/8” x 5/8” used in conjunction with our bar front fluted columns and trim kits. This is the same molding currently included with our bar front trim kits and is now also sold separately in 3 piece bundles.               The PM-158 is a new panel molding measuring 7/8” x 1-5/8” used together with our…

Read More »

New Addition to our Curved Bar Rail Molding Line

At Hardwoods Incorporated we’ve recently added two new curved bar rail molding corners. Pictured below are our BR158 – 135 degree radiuses available in a 6” or 12” version, suitable for small commercial bars, home bars and drink rails. We make these bar rail corners from a solid block of hardwood precision machined to match our BR158 Bar rail straight lengths and 90 degree radius corners.           Also recently added is our BR475-S–135 Degree Radius Corners available in both 6″ and 12″ versions. This “bar top rail” is known as the original “Chicago Bar Rail Molding”…

Read More »

New Addition to our DIY Bar Building Products!

New item just added to our DIY bar building products; 21″ wide Main bar top kits tongue and groove offered in 6′, 8′ and 10′ lengths. This item can be used with or without our glass rail and drip edge option for a wider bar top surface. Suitable for commercial bar tops and home bar tops alike. Combine various lengths for our 21” wide or 16” wide main bar top kits to make a continuous bar top of any length by simply alternating the joints. See our “How to assemble and install bar top kits” for details. Be sure to…

Read More »